Do not turn off the electric water heater when it is not in use, the electric water heater

Many families now use electric water heaters, which brings a lot of convenience to our lives. However, many friends also said that since the installation of electric water heaters at home, the electricity bill at home is getting higher and higher. In the end, when the electric water heater electric water heater is not in use, do you want to turn it off? What are the precautions for using the electric water heater? Let's take a look.

Do you want to turn off the electric water heater when not in use?

Some friends want to ask, if you turn off the electric water heater when you don't use it, will it save power? If the water heater in your home is used every day, it is recommended not to cut off the power; if it is used for a few days, or If you use it once more, you can choose to turn off the power, and then turn it on again, which will save more power. Moreover, the selection of water heaters can not blindly pursue large capacity, to choose the right amount of water heaters according to the number of people, to know that the larger the water heater capacity, in fact, the more power consumption. When selecting a water heater, the quality, insulation effect, and whether or not there are anti-fouling devices should be taken into account.

How to use electric water heaters to save electricity? Many people think that electric water heaters will save electricity when they are used, but it is not. The power is turned off, but it will continue to consume the energy used in the front. The temperature of the remaining hot water in the bucket is decreasing. The energy is released. Re-energizing is reheating. It doesn't make much difference, but it doesn't make much difference, but The comfort of use is reduced. If you want to take a shower at any time, you have to reheat it, it is much more troublesome. But one thing to note is: If you go out for any reason, do not use the water heater for more than three months or for a long time, remember to turn off the power and drain the water in the tank.

Here we introduce how to use electricity to save power:

1. Temperature regulation is very important. If it is always energized, you can set the temperature to constant temperature, 65 °C in winter and 45 °C in summer. This way, the water temperature will not be too high, and it is convenient to adjust the temperature during bathing. On the other hand, it can also achieve the best power saving mode.

2, pay attention to water temperature when using. The use of electric water heaters should try to avoid the peak time of electricity consumption. In summer, the temperature controller can be lowered to achieve the purpose of saving electricity.

3. Set the insulation mode. If your family needs to use hot water every day, then the constant temperature setting is very important, the temperature setting should be reasonable, and the time of opening and stopping should be determined according to the usage. The water heater can be kept in a state of being energized at all times, and then the heat preservation mode can be set, so that not only the hot water can be used all the time, but also the power saving effect can be achieved.

Precautions for the use of electric water heaters

1. Pay attention to safety when using. We must not start the power supply when the electric water heater does not discharge water. Although the current electric water heater has protection functions, there are still many households using old-fashioned electric water heaters, so the safety problem cannot be ignored.

2. If you do not use the electric water heater for a long time, you should pay attention not to store water. Long-term use does not use the water in the water heater tank to empty, to prevent odor and liner scaling. Drainage method: first close the tap water inlet valve, then pull the water heater mixing valve to the hot water, and then lift the safety valve handle up to the horizontal position. At this time, the water in the water heater tank flows out through the pressure relief port of the safety valve. The drain pipe flows down the channel.

3. If you have not used it for a long time, you must ensure that the water heater tank is filled with water before power-on. Otherwise, the water heater will be burnt and the heating tube will be damaged, causing the thermostat to trip. Water injection method: Pull the mixing valve to the hot water, and then open the tap water inlet valve. When the nozzle continuously discharges water, it indicates that the water in the water heater tank has been filled, and then it can be energized and heated.

The use of electric water heaters is still very convenient, and many friends said that they will continue to use even if the electricity bill will become higher. In fact, as long as you pay attention to the use, electric water heaters will not waste electricity. After all, it is normal to use power consumption reasonably. In addition, the safety accident of electric water heaters can not be ignored, we should pay more attention when using.