Electric faucet principle Electric faucet installation steps

With the improvement of people's living standards, electric faucets have entered millions of households, and more and more consumers have recognized electric faucets as a new type of household products. However, during the installation process, electricity is used to make some consumers feel embarrassed. In fact, the installation of an electric hot water dragon is similar to that of an ordinary water tap. It is only necessary to distinguish the water inlet position. Then, Xiaobian will introduce the principle of electric faucets and the installation steps of electric faucets.

Electric faucet principle

Because it has a cold heating function that can replace the faucet, it is called “electric faucet”. It is a kind of water heating in a non-insulated or slightly insulated container. It is only a temporary storage of hot water. It has a device to control the water temperature. Miniature Instant Electric Water Heater. In layman's terms, an electric heating device that rapidly raises the temperature of water when cold water flows through the heater. According to the type of water outlet, it can be divided into two types: export closed type and open type. The company's products are open and open designs.

The principle of rapid energy saving of electric faucets lies in the use of special titanium and other corrosion-resistant high-strength magnetic materials to make the chips, so that the water instantly rises in temperature and heat under the action of high-strength magnetic fields. The faucet can also adjust the power according to the flow to suit the water temperature needed for different seasons.

Electric faucet installation steps

First, remove the original ordinary faucet

First of all, close the water pipe valve, remove the original non-electric hot water dragon, and clean the pipe interface with clean water to avoid excessive rust and form an infarct.

Second, the assembly of parts

1. First, connect the electric faucet elbow to the electric faucet body, and the machine is fixed.

2. If you want to use a washbasin, then unscrew the nut on the main body inlet and fix the electric faucet on the washbasin; if you do not need to wash the washbasin then you can omit this step.

3. Then connect the electric faucet with the water pipe.

Third, check

1. After the electric faucet is installed, first open the water valve switch to check if the connector can leak.

2, then open the electric hot water switch, to the machine water, hot and cold water switch back and forth several times to open the debugging.

3. After the air bubbles are completely discharged from the empty machine, plug it in again.

4. Adjust the hot water to the desired position because the temperature of the hot water is conditioned by the hot water size control switch. The red light will indicate the beginning of heating.

The characteristics of electric faucets

1, fast: instant heat, no need to wait, want to wash as long as the wash, no time limit.

2, small: streamline appearance, stylish and small, make full use of the shower space, is the preferred choice for fashion people.

3, energy saving: no long storage water preheating process and insulation process, almost no heat loss;

4, beautiful: original shape design, light curve, slim shape, does not take up space, let your bathroom add a stylish beauty.

Editor's summary: The principle of electric faucet and the installation steps of electric faucets are introduced here. I hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Electric faucet brand electric faucet principle