How to buy electric iron heating core? How to replace the electric iron heating core?

The electric iron heating core is a component of a welding device. The electric iron heating core is the core that can make the entire electric iron work. If the iron head does not heat, the electric iron will lose its function. One kind of heating core is metal (stainless steel) which has fast heat transfer, the temperature changes greatly when welding, the ceramic is relatively high temperature resistant, and the temperature control is relatively good. It is recommended to weld small parts or stainless steel that has not been welded for a long time. The other is For ceramic heating cores, ceramics can be used for welding large parts for a long time.

Purchase of electric iron heating core

1. Before purchasing a reassuring heater, first we must confirm the qualification of this enterprise. Is it a well-known company in the country, and what are its qualifications? What about user reputation?

2. Why can the company provide a high-performance and high-quality heating core to users? This requires confirmation of the company's resources, whether it has strong technical support, and generally stable operation for more than ten years.

3. The product performance and performance are stable. For companies that have used a customer renewal rate of more than 95%, the product performance will definitely not be bad!

4. The price of the product is transparent, and there is no charge. The good one is too expensive, and the cheap one is not good, so it is necessary to measure the cost-effectiveness of the product, the same configuration, the same performance, basically the price plays a decisive role.

5. After-sales service, whether the after-sales service can be 7 * 24 hours customer service + technical service, timely service, users will be at ease.

　　 How to replace the electric iron heating core?

1. First dismantle the soldering iron, the old heating core is directly thrown away, the wires inside are burned out, the plug part is also burned out, and all the wires must be replaced.

2. It is necessary to cover the connecting wire with insulation sleeve before installation. There is no ready-made section of insulation wire to pull out the sleeve and install it.

3. Connect the pin first, directly connect it to the solid point and cannot slide, you can use pliers to pinch it hard, it is easy to catch fire and burn.

4. Insert the pin back into the soldering iron and sit with tape insulation on one end of the connector. This insulation must be done, and then solder the new wire to the wire end of the soldering iron base.

5. It is enough to restore the soldering iron after finishing it. The entire core changing process is very simple. As long as the insulation treatment is done, there is no problem. For those who often make electronic productions, a handy electric iron is very important.

The above is about the purchase of electric iron heating core and how to replace the electric iron heating core. I believe that through the brief introduction of the above points, friends can have a better understanding of the purchase of electric iron heating cores. With the development of the market, what is the best heating element, also involves the technical threshold of the heating element manufacturer.