US electric water heater repair skills beautiful electric water heater how to

The electric water heater is the most inseparable bathroom equipment when we are taking a bath, but if we have a malfunction when the electric water heater is in the bath, then we will be very sad reminder, and we think that we are in the usual time. In life, it is ok to master some of this knowledge. Next, Xiaobian will take you to find out what the beauty electric water heater repair skills are, and how about the US electric water heater.

First, what is the maintenance skill of the US electric water heater?

1. If the leakage protection power supply line trips and cannot be reset, what should we do?

(1) First, let us first check if the over-temperature protector and the temperature controller are jumping, reset it to power, check whether the leakage switch can be reset, the water heater can work normally, or the over-temperature protector and temperature controller It is normal to measure the continuity of the multimeter with a multimeter. If it is normal, it can be judged that the temperature setting of the overtemperature protector or the temperature controller may change and needs to be replaced. Because there is no instrument to detect the temperature setting, in order to avoid the same fault reappearing, it is best to return the over-temperature protector and temperature controller to the company for testing by special instruments.

(2) Then we will check whether the insulation of the internal connection of the water heater is damaged and cause short circuit leakage. Unplug the connection line between the electric heating tube and the indicator light. Use a multimeter to check that there should be no connection between the connecting lines. General rules should be replaced or bandaged, and it is normal to test each component according to the component detection method.

(3) Finally, we will check the leakage protection power cord and disconnect the leakage protection power cord connection. Note that the wires cannot be touched, plug in the power supply, press the leakage switch reset button to press the reset, if not If it can be reset, the leakage protection device power line leakage device is broken, then we need to replace it.

Second, how about the US electric water heater

1. The appearance of the beautiful electric water heater is fashionable and beautiful, and the edge adopts a smooth transition. The panel adopts two colors of acrylic material to match the texture, and the texture is more outstanding. The body of the product is controlled by fluorescent touch buttons, which can make the working status clear at a glance. . It is convenient for users to master some usage of water heaters.

2. The US electric water heater adopts innovative “warm wall” technology, patented negative ion technology, water cyclone function and other new technologies to make the US electric water heater exceptionally superior. Overturned the ordinary electric water heaters and other long-term, ugly old-fashioned, power-hungry, unsafe and other multiple problems, when the user is operating, the speed of heat is faster, more economical, and safer.

What is the maintenance skill of the US electric water heater? How about the electric water heater in the United States? Xiaobian introduced it to everyone here. I hope that after reading the introduction of Xiaobian, we will not panic after the electric water heater has failed. Understand, more home improvement information, please continue to pay attention to, decoration home network.